MULTI APPLICATION TEST SYSTEM
The AQ2200 multi application test system is the ideal system for measuring and evaluating a wide range of optical devices and optical transmitters. A variety of measurement modules are available, including the following: a high-stability light source, a wideband tunable light source, a high-speed optical sensor with low PDL, a high-resolution variable optical attenuator, a small-sized bit error rate tester with an pulse pattern generator (PPG) and error detector (ED), an optical modulator with variable extinction ratio, various switch modules, an optical return loss module, and an optical receiver supporting two wavelengths. These modules can be installed in any combination on a single platform, providing an ideal measurement system for a variety of applications.The AQ2200 multi application test system is available in two different frame controller platforms. Each model has a certain number of slots for connecting modules, so you can select the best platform size for your intended measurement applications.
AQ2200-621/622 Optical Modulator
The AQ2200-621 and AQ2200-622 are optical modulator modules designed for use with the AQ2200 Series AQ2200-601 BERT Module.
AQ2211 Frame Controller (3 Slots)
"Hot-swapping" capability and remote monitoring and control are even easier with Ethernet support.
AQ2212 Frame Controller (9 Slot)
The multi application test system is available in two different frame controller platforms. Each model has a certain number of slots for connecting modules, so you can select the best platform size for your intended measurement applications.
AQ2200-211 Sensor module (high sensitivity, long wavelength)
The AQ2200-211 is a high-speed longwave sensor for theAQ2200 series.
AQ2200-221 Sensor module
Increase your testing power and capability with the AQ2200-221 sensor module. Thirty two ports can be simlutaneously collectively measured using 16 units of AQ2200-221.
AQ2200-311A Variable Optical Attenuator
A small, lightweight variable optical attenuator providing low insertion loss
AQ2200-331 Optical Variable Attenuator
With built-in optical power meter for monitoring power
Compact and lightweight optical variable attenuator
AQ2200-111 DFB-LD module
Ideal Reference LightSources for Optical Device Measurements. When the modules are mounted in the AQ2200 series frame controllers, it provides a high-output, high-stability DWDM measurement.
AQ2200-136 TLS module
AQ2200-136 TLS module is a tunable light source designed for the AQ2200 multi-application test system. Although it is lightweight with a small, 2-slot module, it is capable of tuning range the 1440 nm to 1640 nm.
AQ2200-141 FP-LD module
The AQ2200-141 and AQ2200-142 provide excellent level stability of ±0.005 dB or better over a 15-minute period and offer excellent stability for all of your measurements.
AQ2200-142 DUAL FP-LD module
The AQ2200-141 and AQ2200-142 are FP-LD light sources for the AQ2200 series. When they are mounted in AQ2200 series frame controllers, they provide high-output, high-stability optical output.
AQ2200-215 Sensor module (high Power up to +30dBm, long wavelength)
Ideal for measuring output power of transmission equipment and optical fiber amplifiers.
AQ2200-231/241/201 Optical Sensor Head (large diameter, short/long wavelength)
AQ2200-231 and AQ2200-241 are AQ2200 series longwave/shortwave large-diameter sensor heads. When they are installed in AQ2200 series frame controllers using the AQ2200-201 Interface Module, they allow optical power to be measured at high speed and with high accuracy.
AQ2200-271 Optical return loss module - New!
Optical Return Loss (ORL) and Insertion Loss (IL) measurements of Optical Component.
AQ2200-411 Optical Switch Module
Superior switching reproducibility
Compact optical switches
AQ2200-412 Optical Switch Module
Superior switching reproducibility
Compact optical switches
AQ2200-421 Optical Switch Module
Superior switching reproducibility
Compact optical switches
AQ2200-601 10 Gbit/s BERT module
Compact bit error rate tester dedicated to high-speed 10 Gbit/s Band
AQ2200-631 10 Gbit/s optical receiver (1.31/1.55micrometre)
Yokogawa's Optical modulator and optical receiver for 10G BERT module offers high quality features.
AQ2200-641 XFP interface module - New!
Cost efficient and flexible solution to build 10 Gbit/s optical BERT system
AQ2200-642 Transceiver I/F Module
The AQ2200-642 reduces the complexity and cost of 10G optical transceiver testing by combining bus and power control features into the same mainframe that performs Signal Generation, BERT and Optical testing.
AQ2200-651 SG Module
The AQ2200-651 Signal Generator module reduces the complexity and cost of 10G optical transceiver testing by combining Signal Generation functions into the same mainframe that provides bus and power control while performing BERT and Optical testing
AQ2202 Frame controller (9 slots)
The multi application test system is available in two different frame controller platforms. Each model has a certain number of slots for connecting modules, so you can select the best platform size for your intended measurement applications.
